Available Configurations

Gain :                 

          - Unity        

          - Global      

          - Individual

   Connector :          

          - BNC         

          - RCA         

 

 

External link opens in new tab or window2X2 Unbalanced Mono Audio DA, Local + Remote, Power Fail By-Pass

Group ProSeries
# Channels 2
Inputs/Channel 1
Outputs/Channel 2
Input 1 Signal Type Unbalanced Audio
Input Configuration 1 Standard 75 Ohms
Input 1 Connector RCA
Output 1 Signal Format Unbalanced Audio
Output 1 Connectors RCA
Power Connector 2 Pin 2.5mm TB
Input Voltage 1 10-28 VAC
Input Voltage 2 10-32 VDC
Height .65
Width 4.4
Depth 2.2
Low Operating Temp (C) -40
High Operating Temp (C) 80
Control 1 Contact Closure
Control 1 Connector 6 pin DIN
Power Bypass NO
Mounting Two 6-32 Inserts

 

External link opens in new tab or window1X4 Balanced Mono Audio DA, Unity Gain

The 12V AC Brick™ is designed to function properly with an input power of 11-13V AC. The Brick will not operate from a DC voltage.

A 2.1mm P5 style connector is used for the power input. If the input voltage is a grounded system, the center pin of the P5 is the power connection and the barrel is the ground side.

All ProSeries units are shipped with a 12V AC, 600mA floating power supply that eliminates any ground loops through the power supply connection.

  • Balanced mono audio distribution amplifier
  • Unity gain
  • Individual drivers
  • Terminal block connectors

 

Group ProSeries
# Channels 1
Inputs/Channel 1
Outputs/Channel 4
Input 1 Signal Type Balanced Audio
Input 1 Coupling DC
Input Configuration 1 Standard 75 Ohms
Gain Configuration Global
Input 1 Connector 3 pin Terminal Block
Output 1 Signal Format Balanced Audio
Output 1 Coupling DC
Output 1 Connectors 3 pin Terminal Block
Power Connector P5
Input Voltage 1 12 VAC
Height .65
Width 4.4
Depth 2.2
Low Operating Temp (C) -40
High Operating Temp (C) 50
Control 1 Contact Closure
Control 1 Connector 6 pin DIN
Power Bypass NO
Mounting Two 6-32 Inserts

 

 

BACK