Available Configurations

Gain :                 

          - Unity        

          - Global      

          - Individual

   Connector :          

          - BNC         

          - RCA         

 

1x2 Composite Video Distribution Amplifier

The 11-111-102 is a one input to two output composite video distribution amplifier with a single ended input (75 Ohm termination).  This unit has unity gain between the input and all four outputs.  Unused outputs do not need to be terminated with 75 Ohms.  All of the video connections are BNC connectors.  This unit is intended to be used with NTSC or PAL video signals.
  • Analog video distribution amplifier (DA)
  • NTSC or PAL formats
  • 1 input, 2 output configuration
  • Unity gain (1X) between the input and outputs
  • Standard single ended 75 Ohm terminated input
  • BNC connectors for video signals
  • Sealed epoxy package
  • 12 VAC power, pin/barrel (P5) power connector
  • 2.2” X 4.4” X 0.65” size (not including connectors)
  • Mounted using two 6-32 threaded inserts

Group ProSeries
# Channels 1
Inputs/Channel 1
Outputs/Channel 2
Input 1 Signal Type Composite Video
Input 1 Coupling DC
Input 1 Signal Format ZYX
Input Configuration 1 Standard 75 Ohms
Gain Configuration Unity
Input 1 Connector BNC
Output 1 Signal Format Composite Video
Output 1 Coupling DC
Output 1 Connectors BNC
Power Connector P5
Input Voltage 1 12 VAC
Height .65
Width 4.40
Depth 2.20
Weight Oz .45
High Operating Temp (C) 50
Power Bypass NO
Mounting Two 6-32 Inserts

 

1X16, Composite Video DA, Std Input, Unity Gain

The 11-111-116 is a one input to sixteen output composite video distribution amplifier with a single ended input (75 Ohm termination).  This unit has unity gain between the input and all four outputs.  Unused outputs do not need to be terminated with 75 Ohms.  All of the video connections are BNC connectors.  This unit is intended to be used with NTSC or PAL video signals.

  • Analog video distribution amplifier (DA)
  • NTSC or PAL formats
  • 1 input, 16 output configuration
  • Unity gain (1X) between the input and outputs
  • Standard single ended 75 Ohm terminated input
  • BNC connectors for video signals
  • Sealed epoxy package
  • 12 VAC power, pin/barrel (P5) power connector
  • 2.2” X 4.4” X 2.15” size (not including connectors)
  • Mounted using two 6-32 threaded inserts
Group ProSeries
# Channels 1
Inputs/Channel 1
Outputs/Channel 16
Input 1 Signal Type Composite Video
Input 1 Coupling DC
Input Configuration 1 Standard 75 Ohms
Gain Configuration Unity
Input 1 Connector BNC
Output 1 Signal Format Composite Video
Output 1 Coupling DC
Output 1 Connectors BNC
Power Connector P5
Input Voltage 1 12 VAC
Height 2.90
Width 4.40
Depth 2.20
Weight Oz 28.8
High Operating Temp (C) 50
Power Bypass NO
Mounting Two 6-32 Inserts

 

 

Quad 1x2 SDI 3G/HD/SD Distribution Amplifier

The 13 and 83 Series Serial Digital Interface (SDI) 3G/HD/SD Distribution Amplifiers (DA’s) included in this manual provide a way of distributing one SDI signal to two or four other devices. Dual and Quad DA’s provide a way of distributing two or four SDI signals to two other devices for each SDI input. Each SDI input features adaptive cable equalization and re-clocking of data rates from 125Mbps to 2.97Gbps. The following SDI formats are supported:

Type Standard Rate Range1

  • Standard Definition (SD-SDI) SMPTE259M 270/360Mbps 400 meters
  • High Definition (HD-SDI) SMPTE292M 1.5485Gbps 200 meters
  • High Definition (3G-SDI) SMPTE242M 2.97Gpbs 120 meters
  • Table 1 SDI Signal Types and Optimized range using Belden 1694A
  • The 13 & 83 Series units automatically detect the incoming serial data stream and suppress accumulated jitter by retiming to the recovered phase-locked data rate.
  • All outputs cable drivers incorporate selectable slew rate control. SDI input and output connections are via high speed BNC connectors.
  • The use of high quality connectors and cable (Belden 1694A or equivalent) is highly recommended to achieve optimum performance.
  • Universal Serial Bus (USB) port/interface (multiple) provides the unit maintenance interface. This permits the user to view and change the default configuration parameters, select specific inputs for system debug, and upgrade firmware.
  • Internal non-volatile memory is used to hold the power up default settings.
  • External power source is isolated from the internal power and will operate correctly from 12-24 VAC or 10-34 VDC.

Group Isolated
# Channels 4
Inputs/Channel 1
Outputs/Channel 2
Input 1 Signal Type SDI Video
Input 1 Coupling AC
Input Configuration 1 Standard 75 Ohms
Gain Configuration Unity
Input 1 Connector BNC
Output 1 Signal Format SDI Video
Output 1 Coupling AC
Output 1 Connectors BNC
Power Connector 4 pin 3.5mm TB
Input Voltage 1 12-24 VAC
Input Voltage 2 10-34 VDC
Height 1.4
Width 4.4
Depth 2.2
Weight Oz 8
High Operating Temp (C) 85
Power Bypass NO
Mounting Two 6-32 Inserts